Wireless 4 zone remote control brightness dimmer with touch panel RS1 is used with single or many L4-M receivers, connected to DLC-D series LED drivers to power up ELS-L series LED lights. To launch LED lights brightness control:

  1. connect L4-M receiver's output with DLC-D driver's 0-10V input
  2. connect L4-M to power source ~230V AC or 12-24V DC
  3. install x2 AAA battery in RS1
  4. match RS1 dimmer and L4-M

Then all four steps are complete, simply press and hold key I to increase and key 0 to decrease brightness of selected zone. Short push I key to turn LED light ON or 0 key to turn it OFF. Press top key with "All" marking to turn ON or OFF all 4 zones.

Each Wireless 4 zone remote control dimmer RS1 can match with one or many receivers. To simultaneously control all available DLC-D drivers just match RS1 with every L4-M receiver, or split into 4 separate zones.

S1, S2, S3 key allows to save brightness levels, aka "Scenes", of all connected zones . Press and hold S key for ~2 sec. to save scene, and short pres to load previously saved light brightness level.

Touch brightness wheel to faster and more precise adjust light.

Matching remote control and receiver

There is two options to match/delete devices:

  • Use the controller’s Match key
  • Use Power Restart

1) Controller’s match key:

  • Match: Short press "Match" key on L4-M controller and immediately press I or 0 key of selected zone on RS1 . If blue "RUN" light on controller blinks 3 times match is successful.
  • Delete: Press and hold "Match" key for 5s to delete all matched devices. When blue "RUN" light blinks 5 times all matched devices are deleted.

2) Power Restart:

  • Match: Switch off the power, then switch power ON again. Immediately press I or 0 key of selected zone on RS1 3 times. If blue "RUN" light on controller blinks 3 times match is successful.
  • Delete: Switch off the power, then switch power ON again. Immediately press I or 0 key on RS1 5 times. When blue "RUN" light blinks 5 times all matched devices are deleted.
General information
Size 155x43x17,5 mm
Material Plastic
Warranty 5 years
Manufacturer SkyDance
Mounting type Remote control holder on wall/flat surface fith screws
CE Marked and tested CE, EMC, LVD, RED
Electrical parameters
Max Current <5mA
Max Voltage 3V DC
Isolation class IP20
Standby current <10µA
Standby time 1 year
Energy source AAAx2 (included)
Temperature parameters
Temperature of environment From -30° C to +55°C
Tc max +85° C
Dimmer parameters
Output signal RF 2.4GHz
Remote distance 30 m
Number of zones 4 zones

RS1 Wireless 4 zone remote control dimmer

  • Brand: SkyDance
  • Product Code: RS1
  • Availability: 1
  • 36.30€

  • Ex Tax: 30.00€

Related Products

ELS-L-120 LED Linear Light with dimming for drywall ceiling (Driver, dimmer and ceiling mount are included)

ELS-L-120 LED Linear Light with dimming for drywall ceiling (Driver, dimmer and ceiling mount are included)

  The linear LED ELS-L-120 lamp is fully developed, assembled and tested by the Edison Grop com..

111.32€ Ex Tax: 92.00€

ELS-L-120 LED Linear Light with dimming for universal ceiling (Driver, dimmer and ceiling mount are included)

ELS-L-120 LED Linear Light with dimming for universal ceiling (Driver, dimmer and ceiling mount are included)

The linear LED ELS-L-120 lamp is fully developed, assembled and tested by the Edison Grop company.&n..

112.53€ Ex Tax: 93.00€

ELS-L-60 LED Linear Light with dimming for universal ceiling  (Driver, dimmer and ceiling mount are included)

ELS-L-60 LED Linear Light with dimming for universal ceiling (Driver, dimmer and ceiling mount are included)

The linear LED ELS-L-60 lamp is fully developed, assembled and tested by the Edison Grop company.&nb..

83.49€ Ex Tax: 69.00€

L4-M wireless 0-10V controller

L4-M wireless 0-10V controller

L4-M is universal 0-10V controller (receiver), which can be conrtoled by every SkyDance brightness d..

36.30€ Ex Tax: 30.00€

ELS-L-120 LED Linear Light with dimming for Armstrong panels.    (Driver, dimmer and ceiling mount are included)

ELS-L-120 LED Linear Light with dimming for Armstrong panels. (Driver, dimmer and ceiling mount are included)

The linear LED ELS-L-120 lamp is fully developed, assembled and tested by the Edison Grop company.&n..

111.32€ Ex Tax: 92.00€

ELS-L-60 LED Linear Light with dimming for drywall ceiling (Driver, dimmer and ceiling mount are included)

ELS-L-60 LED Linear Light with dimming for drywall ceiling (Driver, dimmer and ceiling mount are included)

The linear LED ELS-L-60 lamp is fully developed, assembled and tested by the Edison Grop company.&nb..

82.28€ Ex Tax: 68.00€

ELS-L-60 LED Linear Light with dimming for Armstrong panels (Driver, dimmer and ceiling mount are included)

ELS-L-60 LED Linear Light with dimming for Armstrong panels (Driver, dimmer and ceiling mount are included)

The linear LED ELS-L-60 lamp is fully developed, assembled and tested by the Edison Grop company.&nb..

82.28€ Ex Tax: 68.00€